- Clearance
- G-4 / Bi-Pin Base Bulbs
- T10 / 921 / Wedge Base Bulbs
- 1141 – 1156 Base Bulbs
- 1076 – Dual Contact Base Bulbs
- Fluorescent LED Replacements
- Festoon Style Bulbs
- Fuse – Stairway / Floor Lighting
- Spotlight Bulbs
- Vanity Bulbs
- Miniature Bayonet – Indicator Bulbs
- Porch and Compartment Lighting
- Specialty Bulbs and Products
- NightScapes
- Marine
- Automotive
- Aviation
- Navigation
- New Products
- Product Catalog – DOWNLOAD
New
42mm 6 LED Festoon for Marine and RV
$9.00 – $10.00
REPLACES THIS BULB:
42mm Festoon
Bulb pictures are not to scale.
| Color Temperature | , , , |
|---|
If you have any questions before you order, please call us: 513-899-9152
or email joe@cabinbright.com
Please be sure your bulb base and measurements are correct before ordering.
Description
Perfect for some 42mm festoon navigation lights. (See Joe’s Tips)
• Base: 42mm Festoon – SV8.5mm
• LEDs: 6-Euchips 2835 SMDs
• Volts: 10-30 a TRUE 24 Volt DC Solution
• Amps: 0.06
• Lumens: 250
• Dimensions:42mm from tip to tip, 16mm high, space between the ends is 25mm, 8mm deep
• Color: 3200K-Warm White, 5500K-Day White, Blue, and Red
• DIMMABLE!
This base bulb fits in your 39-44mm Festoon socket.
Colors are for comparison only. Colors will vary with different monitors and settings.
THIS DOES NOT REPRESENT BRIGHTNESS.
Choose your preferred color temperature from the “Choose an Option” drop-down menu above.
Joe’s Tip:
These bulbs are traditionally for the marine market. The Larger size (42mm) is typically found in some navigation lights (usually Perko). When using this bulb for a nav light, it is better to select the 3200K as it’s soft yellow light is more compatible with the red and green lenses. The 5500K has a tendency to wash out the colored lenses.
The RED bulb is used in chartrooms and for night vision on the bridge. The BLUE bulb is normally used in the dual bulb fixtures in salons and lounges. The bulb will fit a wide range of festoon sockets. Measure your socket before purchasing to ensure proper fit. The bulb measures 42mm tip to tip but has a 5mm tolerance on each end.
These are also used in refrigerators and closets in your RV.
These bulbs are traditionally for the marine market. The Larger size (42mm) is typically found in some navigation lights (usually Perko). When using this bulb for a nav light, it is better to select the 3200K as it’s soft yellow light is more compatible with the red and green lenses. The 5500K has a tendency to wash out the colored lenses.
The RED bulb is used in chartrooms and for night vision on the bridge. The BLUE bulb is normally used in the dual bulb fixtures in salons and lounges. The bulb will fit a wide range of festoon sockets. Measure your socket before purchasing to ensure proper fit. The bulb measures 42mm tip to tip but has a 5mm tolerance on each end.
These are also used in refrigerators and closets in your RV.
Reviews (1)
1 review for 42mm 6 LED Festoon for Marine and RV
Powered by
| 5 star | 100% | |
| 4 star | 0% | |
| 3 star | 0% | |
| 2 star | 0% | |
| 1 star | 0% |
Shipping & Delivery
You may also like…
Related products
1141M SINGLE Contact OPPOSITE Pins NAV Bulb – VERY BRIGHT
REPLACES THIS BULB:
1141 / 1156 Single Contact Base
This SINGLE contact opposite pin bulb fits in your Nav, Steaming, Anchor, and Masthead lights that have a single contact on the bottom and the pins on the base opposite each other near the bottom of the base. 30-5730 LEDs provide 800+ Lumens - TWICE the Lumen output of the incandescent bulb you are replacing. 10-30 VDC will allow for large voltage fluctuations as well as perform perfectly in a 24-volt environment. At .125 amps, or 1.5 watts, this bulb draws only 6% of the power of your existing incandescent bulb. Available in 3200K for Red/Green Nav Lights, 4100K for general use in most light fixtures, and 5500K for Anchor, Steaming, and Masthead lights.
Bulb pictures are not to scale. 
1141 / 5008 Single Contact Base
43mm Festoon
Bulb pictures are not to scale. 
FTR-12 / 12-inch LED Fluorescent Tube Replacement
REPLACES 12-inch TUBES!
25% BRIGHTER Than Your Existing Tubes!
Each printed circuit light board provides 460 Lumens and draws .25 amps for a total of 900 Lumens and .5 amps for a 2 tube fixture. Available in 4100K (natural white), or 5500K (day white) 12” LED Fluorescent Tube Replacement 25% BRIGHTER than your existing 2 tubes.
The FTR-12 IS NOT AS BRIGHT AS THE 12-X!
JC10 or JC20 Halogen Bulb. VERY HOT. Draws 2 Amps
The single Epistar 0810 COB chip delivers a serious Luminosity PUNCH to light your world.
SINGLE Contact Offset Pins AVIATION Wing Tip and Taillight NAV Bulb
REPLACES THIS BULB:
BAY15S Single Contact Offset Pin
Bulb Pictures not to scale.
SINGLE contact offset pin bulb fits in some Wing Tip Nav lights. 30-5730 LEDs provide 800+ Lumens - TWICE the Lumen output of the incandescent bulb you are replacing. 10-16 VDC will allow for large voltage fluctuations. At .125 amps or 1.5 watts, this bulb draws only 6% of the power of your existing incandescent bulb. Available in 3200K for Red/Green Nav Lights, Red and Green bulbs available for faded nav light lenses. 
NightScapes™
Introducing NightScapes by Cabin Bright. You asked we listened. We spent 6 months designing and testing a 16’ 5” IP67 weatherproof strip to our precise specifications. The result? An extremely bright, completely controllable LED strip. Easy installation with everything you need right in the package. 
Lawrence (verified owner) –
A pleasure, as always. Never disappointing. Thank you