• Base: 9004, 9005, 9006, 9007, H4, H7, H9/H11, H13/9008
• LEDs: 2-4 Very High Brightness Cree LED Chips
• Volts: 12-24 VDC
• Amps: 2.3 | 30 Watts
• Lumens: 6000 Each Bulb
• Weather Rating: IP67 (Protected from total dust ingress and immersion in water to a depth of 1 meter)
• Dimensions: Fits in your existing headlight fixture
• Color: 6500K High-Intensity Daylight
Joe’s Tip:
These LED headlight replacements are an EXTREMELY bright alternative to their incandescent cousins. PLEASE identify your exact headlight bulb by model number BEFORE ordering. There are two factors that determine the type of bulb in your vehicle. The mounting flange and the plug. Normally, the headlight designator is stamped on the bulb. Then match it up with the “Choose Option” selection for the Base type. Your vehicle either has one or two headlights per side. If it has one headlight per side, then the bulb will provide the HIGH and LOW beams in one bulb. If your vehicle has two headlights per side, then a single bulb provides either the HIGH or LOW beams. My suggestion is that because these bulbs are SO bright, try replacing only the LOW beams first. You may be so satisfied you will not need to replace the HIGH beams.
These LED headlight replacements are an EXTREMELY bright alternative to their incandescent cousins. PLEASE identify your exact headlight bulb by model number BEFORE ordering. There are two factors that determine the type of bulb in your vehicle. The mounting flange and the plug. Normally, the headlight designator is stamped on the bulb. Then match it up with the “Choose Option” selection for the Base type. Your vehicle either has one or two headlights per side. If it has one headlight per side, then the bulb will provide the HIGH and LOW beams in one bulb. If your vehicle has two headlights per side, then a single bulb provides either the HIGH or LOW beams. My suggestion is that because these bulbs are SO bright, try replacing only the LOW beams first. You may be so satisfied you will not need to replace the HIGH beams.
Installation Tips:
The bulbs come with a connection to a driver and then plugs into the vehicle’s power. When you seat the new LED headlight into the headlamp fixture it will seat and tighten with the rubber gasket. Be sure to align the LEDs in the center of the reflector for maximum intensity. The headlamp fixtures have a reflector, usually on the sides of the fixture. Your new LED headlight rotates either by indentations in the base, or a set screw you can adjust with the included Allen wrench. Usually, there was a rubber cap where the old headlamp fit into the fixture. This will not be used on your new installation. It will block the effects of the built-in fan and is not necessary as the LED bulb is IP67 rated (weatherproof). The addition of the driver can be remedied by simply wire tying it to the vehicle frame, or in many cases resting it on a shelf or platform near the fixture.
The bulbs come with a connection to a driver and then plugs into the vehicle’s power. When you seat the new LED headlight into the headlamp fixture it will seat and tighten with the rubber gasket. Be sure to align the LEDs in the center of the reflector for maximum intensity. The headlamp fixtures have a reflector, usually on the sides of the fixture. Your new LED headlight rotates either by indentations in the base, or a set screw you can adjust with the included Allen wrench. Usually, there was a rubber cap where the old headlamp fit into the fixture. This will not be used on your new installation. It will block the effects of the built-in fan and is not necessary as the LED bulb is IP67 rated (weatherproof). The addition of the driver can be remedied by simply wire tying it to the vehicle frame, or in many cases resting it on a shelf or platform near the fixture.
1157-Dual Contact Dual Filament Bulb
7443 Dual Intensity 
3157 
1141 / 1156 Single Contact Base
1141 / 5008 Single Contact Base
168 / 192 Wedge Base Marker Light Bulb
T10 / 921 - Wedge Base, 5-5050 LEDs, 12 volts - .09 amps, 70 Lumens, 3200K-Warm White or 5500K-Day White
Bulb pictures are not to scale. 
BA9S Miniature Bayonet
BA9S Minature Bayonet Base, 5-5050 LEDs, 12 volts - .06 amps, 90 Lumens, 3200K-Warm White or 5500K-Day White
Bulb pictures are not to scale. 
Fuse Style Base, 3-5730 HIGH-INTENSITY LEDs, 9-16 VDC – .03 amps, 150 Lumens, 3200K-Warm White or 5500K-Day White
44mm Festoon
Bulb pictures are not to scale. 
Chari (verified owner) –
These don’t flicker like others I have had